Prerequisites: - single qulu Professional license for recording


IP CAMERA AUTO-DISCOVERY & MANUAL ADDITION
qulu automatically discovers supported devices if they are located on the same subnet (LAN). Auto-discovered deviceswill show up in the Resource Panel after qulu client is started. The Auto Discovery feature for qulu works with ONVIFProfle S devices and/or devices integrated via an SDK/API.


IP Cameras and video sources (HTTP links, RTSP streams) can also be added manually.


To add an IP camera/video source manually to your System

  • Right-click on server in the Resource Panel and select Add Camera.
  • Do either;

    1. To add a single camera or video source (HTTP or RTSP URL) enter the URL. 

         http://172.16.1.95 or rtsp://172.16.1.95:554/x/xxx

    2. To Add Multiple non-discovered sources or device manually select Subnet Scan and enter the desired IP range to begin scanning. Enter a desired IP range to start scanning. By default, addresses 0-255 are recommended. As a result, the entire network will get scanned for cameras.

  • Specify authentication parameters in login and password fields.
  • Specify discovery port if needed. Most cameras are discovered on port 80 (checked Auto box is recommended).
  • Press Scan to initiate search.
  • If located, the cameras will be displayed in order.
  • Select desired cameras and click Add Selected.


  • Cameras will be added to the Resource Panel.

Pelco Optera Series viewed in qulu Client: